• Locally Owned & Insured
  • 5.0 Star Rated
Gutter replacement on a Sacramento home

Serving Pocket & Greenhaven · Sacramento

Gutter replacement for your Sacramento home

Old gutters off, fascia checked, and a new seamless system formed on-site, usually in one to two days. $17–$25 per linear foot installed.

Old gutter removal · New seamless gutters · Workmanship guarantee

Free · No obligation

Step 1 of 2

Free Replacement Estimate

Replace old gutters with a new seamless system. Start with a free on-site assessment.

What do you need?

So we can confirm service in your neighborhood.

Free EstimateNo ObligationLocal Service

Prefer to talk? Call (916) 232-5022

Gutter replacement in Sacramento: the short answer

Replacement means removing your old gutters and downspouts, inspecting the fascia and soffit that have been hidden behind them, repairing any rot before new hangers go in, then installing a new seamless aluminum system formed on-site for each run. Our published price is $17–$25 per linear foot installed, and most whole-home jobs land between $2,500 and $7,500, downspouts included. Most homes are done in one to two days. Request a free estimate or call (916) 232-5022 to book an on-site measurement and written quote.

Installed price
$17–$25 / ft
New seamless aluminum
Most Sacramento homes
$2,500–$7,500
Time on site
1–2 days
Tear-out to water test
To book
Free estimate
Online or (916) 232-5022

What gutter replacement costs in Sacramento

What you’re buyingPublished priceNotes
New seamless aluminum gutters$17–$25 per linear ftFull system, downspouts included
Whole-home replacement$2,500–$7,500Most Sacramento homes
Downspout replacement$50–$150 eachDownspout-only work; included with new gutters
Downspout extensions and drainage$25–$100 per locationSplash blocks, extensions, French drains
Minor repair instead$150–$400Single section, sealant, refasten, patch
Major repair instead$400–$1,200Multiple sections, fascia work, extensive damage
New gutters + guards together$28–$35 per linear ftPackage rate; LeafBlaster Pro on most jobs

Ranges from our Sacramento pricing page. Fascia repair and removal of existing gutters are quoted separately if required. Want a number for your own house first? Use the gutter cost calculator.

Should you repair or replace your gutters?

Add up the repairs your gutters need. If that total is more than half the cost of replacing the system, replace it. Seamless aluminum typically lasts 20 to 25 years in Sacramento, so age counts too.

Repair

$150–$400 minor · $400–$1,200 major

  • One or two leaking joints, or a single sagging section
  • Gutters under about 15 years old
  • Fascia behind the gutter is still solid
Gutter repair in Sacramento

Replace

$17–$25 per ft · $2,500–$7,500 most homes

  • Leaks or sagging across several sections
  • Rust, corrosion or seam separation along multiple runs
  • Gutters past 20 years, or overflowing because they are undersized

Worked examples and the 50% rule: gutter repair vs. replacement in Sacramento.

What wears gutters out in Sacramento

Most replacements we quote trace back to one of four local causes.

Summer highs over 100°F

Heat cycling

Long runs expand and contract between cold winter nights and triple-digit summer days. That movement loosens hangers and works open seams and end caps until they leak.

About 85% of rain falls Nov–Mar

A compressed rainy season

Gutters sit dry for months, then take a winter of rain in a few weeks. Undersized or badly pitched systems overflow onto fascia and foundations every storm.

Oak, pine and sycamore

Debris left sitting

Wet leaves and needles hold moisture against the metal, and conifer debris carries acidic compounds that speed corrosion in aluminum gutters.

Hidden until tear-off

Fascia rot behind the gutter

Years of overflow soften the fascia boards the hangers screw into. New gutters anchored to rotted wood fail early, so we check and repair the fascia before hanging the new system.

Fascia board damage behind Sacramento gutters

What replacement looks like across Sacramento

Housing age decides most of the job.

1950s–1980s ranch homes

Arden-Arcade

Original galvanized steel gutters showing corrosion. We replace them with seamless aluminum and check whether 5-inch runs should go to 6-inch for today’s storms.

Built in the 1980s and 1990s

South Natomas

Aluminum systems now sagging from loosened hangers, separating at seams and streaked from oxidation. Full replacement usually beats patching section by section.

Natomas flood-zone gutter and drainage guide
2000s and newer

North Natomas

Builder-grade 5-inch gutters with short downspouts on flat lots. Replacement here is mostly about capacity and moving water away from the foundation, not age.

Homes built before 1948

Land Park & Curtis Park

Replacement means half-round gutters on strap hangers in copper or painted aluminum, not K-style bolted over the rafter tails. Hidden box gutters get restored, not covered over.

Land Park & Curtis Park gutter guide
Copper and custom systems

East Sacramento

Older copper gutters can often be repaired at the joints. When a run is too far gone, we replace it in a profile that matches the rest of the house.

Trees planted in the 1940s–1960s

Tahoe Park

Many homes have gone years without gutter service under now-towering trees. A deep cleaning and minor repair sometimes buys time; when the hangers and fascia are gone, replacement is the better spend.

How a Sacramento gutter replacement goes

Most homes are done in one to two days.

  1. Step 1: Tear-out

    Old gutters, hangers and downspouts come off and are hauled away.

  2. Step 2: Fascia and soffit check

    With the gutters down, we inspect the wood that was hidden behind them and repair rot before anything new is mounted.

  3. Step 3: Form and hang

    New seamless aluminum is formed on-site for each run, color-matched to your trim and hung on hidden hangers about every two feet.

  4. Step 4: Pitch and discharge

    Each run falls toward its downspout, and extensions carry the water away from the foundation.

  5. Step 5: Water test

    We run water through every run before we leave. The work is backed by our Workmanship Guarantee.

Our work on Sacramento-area homes

Photos from our own crew on local jobs. No stock imagery.

See more of our work
Seamless gutter replacement along a Sacramento-area garage eave
Seamless gutter replacement
Gutters and downspout on the front of a brick Sacramento-area home
Gutters and downspout on a brick home
Gutter fascia sealant repair on a Sacramento-area home
Fascia sealant repair
Dark gutter and downspout close-up on a Sacramento-area home
Dark gutter and downspout

Old, Failing Gutters Cost Sacramento Homeowners Thousands in Damage Every Year

When gutters fail, water damage to your foundation, fascia, and siding can cost $10,000-$30,000+ to repair. Don't wait until it's too late.

$30K+
Maximum damage from failed gutters in Sacramento

Rusted, leaking, or sagging gutters silently destroy your home. Foundation cracks, rotting fascia, siding damage, and interior water intrusion compound over time into five-figure repair bills.

$10K-$30K+ in Water Damage Repairs

Foundation cracks, fascia rot, siding damage

Failed gutters cause foundation cracks, fascia rot, siding damage, and interior water damage. These repairs are expensive and only get worse with time.

Constant Repairs Add Up Fast

$500-$1,000+ yearly on patching

Patching old gutters is throwing money away. When you're spending $500-$1,000+ yearly on repairs, replacement is the smarter investment.

Decreased Curb Appeal & Home Value

$5,000-$10,000 in lost value

Rusty, sagging gutters make your Sacramento home look neglected. New gutters instantly boost curb appeal and home value by thousands.

From Old to New — Complete Gutter Transformation

See how professional gutter replacement transforms Sacramento homes with beautiful, long-lasting protection.

On site
New seamless gutter run coming off a gutter forming machine at the curb of a ranch home

Out With Rusted, Leaking Gutters

  • Old gutters torn out
  • Seamless runs rolled at your curb
  • Cut to the length of each wall
  • Fewer seams to leak
Finished
New dark seamless gutters along the eaves of a home under oak canopy

New, Beautiful, Protected

  • Brand new seamless gutters
  • Perfect water flow
  • 20-25 year protection
  • Boosted curb appeal
New white seamless gutter on a stucco home with an installer on a ladder further down the run
Crew hanging a new run on a stucco home

Trusted by Sacramento Homeowners

Read every review in full on our Google listing.

Google reviews

5.0

5.0 on Google · 3 reviews

Proudly Serving Sacramento and Surrounding Areas

Professional gutter replacement throughout the greater Sacramento region.

Full service area: 35 cities across Sacramento, El Dorado, Placer, Yolo, Nevada, Sutter and Yuba counties.

Gutter Replacement in Sacramento, Done Right

A full gutter replacement is a tear-out and rebuild, not a patch. We remove every section of the old system, inspect the wood behind it, and hang a brand new seamless run fabricated to the exact length of your roofline. That matters in the Sacramento Valley, where the same gutter has to survive 100-degree summers, the heavy bursts of the November-through-March rainy season, and a steady drop of oak and sycamore debris in between. By the time most local gutters hit 20 to 25 years old, the metal has fatigued, the seams have opened, and the hangers no longer hold pitch. Replacement resets all of it at once.

Replacement at a glance
ScopeFull tear-out and rebuildFascia and soffit inspected before new gutters go up
GutterSeamless aluminum, 5- or 6-inch K-style6-inch and 3x4 downspouts under steep roofs or heavy oak
ColourMatched to fascia, trim or stuccoFactory colour locked into the metal
Material warranty20–25 years aluminum50-plus years on copper; Workmanship Guarantee on the install
Published price$17–$25 per ft$2,500–$7,500 for most homes

Signs you need replacement, not repair

One bad joint or a single sagging span is usually a gutter repair. Replacement is the right call when the problems are spread across the whole system. Watch for these:

  • Rust or pitting on more than one run. Older steel gutters around Sacramento rust from the inside out once the coating fails.
  • Seams separating at the corners. Sectional gutters are joined with sealant that dries out and cracks in the valley heat.
  • Peeling paint or water stains on the fascia and siding. That is overflow leaving a record of where the gutter is failing.
  • Gutters pulling away from the roofline or visibly sagging between hangers, usually after years of debris weight and standing water.
  • Pooling at the foundation after a storm, which signals the pitch is gone and the system no longer carries water to the downspouts.
Seamless gutter run coming off the forming machine on the trailer at the curb
Run coming off the forming machine

Why seamless gutters win in the valley

We fabricate seamless aluminum gutters on-site from a single coil, cut to the precise length of each run. Old sectional gutters join short pieces with sealant every few feet, and every one of those joints is a future leak. A seamless system has joints only at corners and downspouts, which is exactly where the heavy October-through-March runoff puts the most stress. Aluminum will not rust, holds its baked-on color without repainting, and shrugs off the swing from triple-digit summer afternoons to cold winter mornings. For most homes we install 5-inch or 6-inch K-style; the 6-inch sizing and 3x4 downspouts move noticeably more water, which is the right choice under steep roofs or where mature oaks dump heavy debris.

Color matching and curb appeal

Replacement is the moment to fix the look of your home, not just the function. The aluminum coil comes in dozens of factory colors, so we match your fascia, trim, or stucco instead of defaulting to white. The color is locked into the metal, so it will not chalk or peel the way painted steel gutters did a generation ago. New seamless gutters in the right color are one of the cheapest exterior upgrades that visibly lifts curb appeal.

Black seamless gutter with micro-mesh guard above white board-and-batten siding
Black gutter over board-and-batten
Installer hanging new white seamless gutters on a single-story home with a concrete tile roof
New gutters going up on a tile-roof home

Fascia and soffit: the part you cannot see

The fascia board is the wood your gutter screws into, and it spends years hidden behind the old system. Chronic overflow from failing gutters soaks that board until it rots. Hanging brand new gutters on soft, rotted fascia is the single most common reason a replacement fails early. The moment the old gutters come down we inspect the fascia and soffit, repair or replace any compromised boards, and only then mount new hidden hangers into solid wood. We document anything we find so there are no surprises on the estimate.

Built for Sacramento code and climate

Every new system is pitched to drain toward the downspouts and flow-tested before we leave, so the first real storm is not the first test. We size downspouts and add outlets where the roof area demands it, route water away from the foundation, and tie into existing underground drains where present. New gutters carry manufacturer material warranties (typically 20 to 25 years on aluminum, 50-plus years on copper), and our installation is backed by our Workmanship Guarantee. If you want to never clean these gutters again, we can add gutter guards with your new gutters during the same visit, which is far cheaper than retrofitting later. Not sure replacement is the right scope yet? Compare it with new gutter installation in Sacramento for homes without existing gutters, and get an instant number from our gutter replacement cost calculator.

Sacramento gutter replacement questions

How much does gutter replacement cost in Sacramento?

Gutter replacement in Sacramento runs $17–$25 per linear foot installed for new seamless aluminum gutters, and most whole-home jobs land between $2,500 and $7,500, downspouts included. Fascia repair and removal of the old system are quoted separately when a job needs them.

How do I know whether to repair or replace my gutters?

Total up the repairs. If they come to more than half the cost of replacement, replace. Repair makes sense for one or two problem spots on gutters under about 15 years old. Replace when leaks, sagging or rust run across several sections, or when the gutters are past 20 years.

How long does gutter replacement take in Sacramento?

Most Sacramento homes are done in one to two days: tear-out, fascia check, on-site forming, hanging, downspouts and a water test. Large two-story homes, or jobs that need fascia boards replaced, can run longer.

Do you fix rotted fascia during gutter replacement?

Yes. We inspect the fascia and soffit as soon as the old gutters come down, because that wood has been hidden for years. Rot is repaired or replaced before new hangers go in, since anchoring new gutters to soft wood is the most common reason a replacement fails early. Fascia work is quoted separately.

My Natomas gutters overflow every storm. Do I need new gutters?

Not always new, but often bigger. Many North Natomas homes have builder-grade 5-inch gutters and short downspouts on flat lots with clay soil. Replacing the overflowing runs with 6-inch gutters and extending downspouts 6 to 10 feet usually solves it. Older South Natomas systems from the 1980s and 1990s are more often due for full replacement.

Should I add gutter guards when I replace my gutters?

If trees overhang your roof, replacement is the natural time. New gutters and guards together run $28–$35 per linear foot installed, less than adding guards later, because guards on brand-new gutters skip the cleanout and reseal. Doing both in one visit also keeps the new system clear from its first winter. We typically install LeafBlaster Pro, Gutterglove’s contractor-only stainless micro-mesh line, and a standard micro-mesh guard on some jobs.

What gutter material is best for Sacramento homes?

Seamless aluminum is the most common choice in the Sacramento Valley. It does not rust, handles 100-degree summers and winter rain without warping, comes in factory-baked colors to match your trim, and lasts 20 to 25 years. We size the gutter, 5-inch or 6-inch K-style, to your roof pitch and the runoff your roof sheds.

Can you match the color of my new gutters to my house?

Yes. Seamless aluminum comes in a wide range of factory-baked colors, so we match fascia, trim or stucco rather than defaulting to white. The color is baked into the coil, so it will not peel or need repainting the way older painted steel gutters did.

Micro-mesh gutter guard on an aluminum gutter along a concrete tile roof above a garage on a stucco home

Tell us about your gutters

One local crew measures, quotes and does the work. You get a fixed written price before anything starts, and there is no obligation to book.

Call (916) 232-5022
  • Free
    On-site estimates
  • Fixed
    Written quotes
  • Insured
    Liability coverage
  • Since 2010
    Locally owned

Request your free estimate

Usually a same-day reply. No sales visit required to get a number.

Or call (916) 232-5022

Insured. We use your details only to prepare your estimate.

Call nowFree estimate